Version 4 of the HP Authentication Suite of applications has been released,Including Microsoft Universal Print Anywhere!
Search V4 Release update
Here is a List of special Firmware and Project files that will enable your to configure your Elatec TWN4 reader to support:
1. HP Secure Authentication Mobile BLE Badge
2. CypherCard (Smart Biometric cards)
3. Basic ISO14443A (UUID) 32/56 Bit cards
You will require the following files for you to program your Elatec TWN4 Reader !
1. Elatec App Blaster tool - Click Here to Download and Unzip - TWN4DevPack503
2. The TWN4_xKx492_TEST100_Test_Project.bix file is the primary Firmware and is required to program any of our Project Files that contain the .abp extension - Please Download TWN4_xKx492_TEST100_Test_Project.bix, and store on Local PC
3. Here is a List of Pre-Configured Project files, feel free to choose anyone that suites your requirements, Please download and store on Local PC in the same location as your BIX file
B) BLE & ISO14443A UUID (32/56)bit
Note:
If you decide to create your own project file from scratch, you will still require our
TWN4_xKx492_TEST100_Test_Project.bix file.
Important!
You will need to plug your Elatec TWN4 Reader into a Windows PC, and this will require a suitable USB Cable.!
Here is a How to Video demonstrating how to Load any of the Project Files so you can Program accordingly ( Click here )
You can also use HP-Elatec-Reader-Management-v2.5.4.0.zip tools to remotely update all firmware + config settings, over TCPIP while the reader is connected to your HP Device as long as HP Authentication Manager is not Installed, else it will break HP Authentication Manager and you will need to re-install to fix it.
FAQ
How to configure Elatec TWN4 Readers
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article